AK-11 – Linear PDF Manual

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.

Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code. The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad, each relay will assume the state it was in when power was removed.

AK-11 Installation Manual:
Download Here : AK-11 PDF Manual

Features

  • Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities
  • Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
  • Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
  • Up to 480 programmable input codes of one to six digits each for activating either or both relays
  • Two LED indicators show system status
  • Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout
  • Programmable courtesy light illuminates keypad for 1, 2, 3, or 4 minutes, or always on
  • Tactile and audible feedback
  • Keylock secures keypad to mounting backplate
  • 4″ W x 5.5″ H x 3″ D

 

 

 

AK-11
Dimensions: 4.0″ W x 5.5″ H x 3.0″ D (101.6 x 139.7 x 76.2 mm)
ELECTRICAL
Voltage: 12-24 Volts AC or DC (AC supply must be transformer isolated)
Current: 10 mA typical, 150 mA maximum
OUTPUTS
Main Relay: Form “C” 5 Amps @ 28 Volts maximum
Auxiliary Relay: Form “C” 1 Amp @ 28 Volts maximum
Solid State Outputs: Short-to-common 100 mA @ 24 VDC maximum
ENVIRONMENTAL
Temperature: -22° F to +149° F (-30° C to +65° C)
Humidity: 5% to 95% non-condensing